Icom IC-720A Used Price & Fair Market Value

~$270
Fair market value
$270 (median of recent sales)
Typical range
$146 – $349
Based on
6 sold listings
Last updated
October 23, 2026

Values are estimates from recent comparable sales — condition, accessories, and included extras vary. Always compare before buying.

Selling your Icom IC-720A? Run its Rig Check → Answer the questions a sharp buyer will ask and get a condition report for your listing — a fully answered report lets a truly nice radio demand a good price.

IC-720A price history

$193$225$256$288$320 Jul '26 Oct '26 $295

Median sold price per month from 6 sold listings (Jul '26–Oct '26). Up ~18% over the period.

Recent sold listings

Date soldItemPriceStatus
Oct 2026ICOM IC-720A$295SOLD
Sep 2026ICOM IC-720A$349SOLD
Sep 2026ICOM IC-720A$199SOLD
Aug 2026ICOM IC-720A$146SOLD
Aug 2026ICOM IC-720A$289SOLD
Jul 2026ICOM IC-720A$250SOLD

Live IC-720A deals

No live below-market deals on this model right now — the good ones sell fast. Get the daily digest and you’ll see the next one before anyone else.

About the Icom IC-720A

The Icom IC-720A is an all-solid-state HF transceiver from the very start of the microprocessor era — advertised as new in March 1981 and reviewed in RadCom in February 1982. It receives general coverage from 0.1 to 30 MHz and transmits on nine ham bands (160 through 10 meters, WARC bands included), at 100 watts adjustable down to about 10 on SSB, CW and RTTY, and up to 40 watts on AM. There is no FM as stock. Two VFOs, split operation, passband tuning with variable bandwidth, a speech processor, noise blanker and VOX were all standard at a time when competitors charged extra for most of that list — and the receiver was a genuine performer, with Sherwood-table figures (roughly 138 dB dynamic range) that still read respectably today. It runs on an external 13.8 V / 20 A supply; the matching supply was the IC-PS15. It suits a bargain hunter who wants a capable vintage HF rig with a real receiver and one of the best-feeling main tuning dials Icom ever made — owners single out the flywheel dial and the almost-military die-cast construction. What it is not is a modern plug-and-play radio: there is no CI-V computer control (the digital interface predates CI-V entirely), and at 40-plus years old, condition is everything. When buying used, two checks decide the deal. First, the band switch: the 720 series selects its band filters with a microprocessor-driven stepper-motor rotary relay — the famous "klack-klack" on every band change — and it is the model's best-known weak point; Adam Farson's widely read guide to good older Icoms specifically does not recommend the IC-720 series because of it. Change bands through all nine, repeatedly, and make sure it steps cleanly every time. Second, tune slowly across every 1-MHz segment: a documented failure mode is the PLL losing lock in a roughly 100 kHz slice that repeats every megahertz. Verify full output on several bands too — a tired driver stage can hide behind doubled bias on the remaining transistor. A lightly used example is worth a premium here; a relay-tired one is a project, and servicing is genuinely awkward — the modules are stacked and the PLL board is the hardest to reach.

Common questions

Can I get FM on the IC-720A — does it do 10-meter FM?

Not as stock. The radio was built for SSB, CW, AM and RTTY (FSK) only. DL4SDC's documented modification adds FM by sacrificing the RTTY position — a build project involving the first-IF signal path and a varicap-modulated oscillator, not a menu setting. If you need 10m FM repeaters, buy a rig that has FM; if you enjoy a well-documented mod, this one exists.

Can I control an IC-720A from a computer — does it have CI-V CAT?

Not natively. The 720A's digital interface predates Icom's CI-V serial protocol — it is a 4-bit parallel bus with handshake lines, and exchanges take about 100 ms. A documented hobby project (PIC microcontroller plus a level converter) makes the radio appear to software as an IC-735, giving frequency, mode and VFO control that has been tested with fldigi and Ham Radio Deluxe. Out of the box, though, plan on turning the (excellent) knob yourself.

Can the rotary relay band switch be replaced or done away with?

Yes — a published modification exists for exactly that, which tells you how central this part is to owning a 720A. The stock microprocessor-controlled rotary relay steps the band filters audibly on every band change, and multiple owners report problems with it while others with lightly used radios report none. Before buying, work the band switch through all nine bands repeatedly; afterwards, know that both cleaning the radio's relays and the replacement mod are documented if it starts to misbehave.

Get IC-720A deal alerts

Join the daily digest — one email a day when new below-market bargains are posted, including the Icom IC-720A. No spam, unsubscribe anytime.

Other Icom equipment