Radio Shack HTX-202 Used Price & Fair Market Value

~$58
Fair market value
$58 (median of recent sales)
Typical range
$35 – $75
Based on
12 sold listings
Last updated
November 13, 2026

Values are estimates from recent comparable sales — condition, accessories, and included extras vary. Always compare before buying.

Selling your Radio Shack HTX-202? Run its Rig Check → Answer the questions a sharp buyer will ask and get a condition report for your listing — a fully answered report lets a truly nice radio demand a good price.

HTX-202 price history

$20$37$54$71$88 Aug '26 Nov '26 $45

Median sold price per month from 12 sold listings (Aug '26–Nov '26). Down ~29% over the period.

Recent sold listings

Date soldItemPriceStatus
Nov 2026Radio Shack HTX-202$45SOLD
Nov 2026Radio Shack HTX-202$44SOLD
Nov 2026Radio Shack HTX-202$75SOLD
Oct 2026Radio Shack HTX-202$60SOLD
Oct 2026Radio Shack HTX-202$55SOLD
Sep 2026Radio Shack HTX-202$60SOLD
Sep 2026Radio Shack HTX-202$35SOLD
Sep 2026Radio Shack HTX-202$35SOLD
Sep 2026Radio Shack HTX-202$60SOLD
Sep 2026Radio Shack HTX-202$50SOLD
Aug 2026Radio Shack HTX-202$60SOLD
Aug 2026Radio Shack HTX-202$67SOLD

Live HTX-202 deals

No live below-market deals on this model right now — the good ones sell fast. Get the daily digest and you’ll see the next one before anyone else.

About the Radio Shack HTX-202

The Radio Shack (Realistic) HTX-202, catalog 19-1120, first appeared in the 1992 catalog and became the first ham radio a lot of new Technicians ever owned: a single-band 2-meter FM handheld, 144–148 MHz, built like a brick and programmed entirely from its own keypad — there is no PC programming on this radio, and there never was. It stores 16 memories (one calling, three priority, and twelve standard, per the manual notes), uses a BNC antenna connector, and takes a Yaesu-style speaker-mic plug on top. Output is honest but voltage-dependent: about 2.5 watts on the supplied 7.2 V NiCd pack, 4 watts on the 9 V six-AA pack, 5 watts at 12 V, and 6 watts at 13.8 V, with a 1-watt low setting. That voltage ladder is exactly what makes it a good cheap second radio, a loaner, an APRS-adjacent beater, or a glove-box 2-meter rig today — if it works. It will not do 70 cm, digital voice, or wideband receive tricks, and it was never meant to. What it does is plain 2-meter FM, loudly and simply, which is why clean working ones still sell steadily in the $35–$75 range instead of going to the landfill. Buying used, the radio itself is rarely the problem — the batteries are. The original NiCd packs are decades past dead, so ask what pack is actually in the deal (a working replacement NiMH pack or the six-AA holder is real value; a dead original pack is a project). The second, sneakier battery is inside: a soldered-in lithium backup cell that holds the memories. When it dies the radio wakes up showing ER1 and forgets everything — see the first FAQ. A unit that powers on clean, holds its memories overnight, and makes full power for its supply voltage is the one to pay the median for; an ER1-every-morning unit or an untested one should price like the $15–$25 untested sales in the ledger, not like a tested one.

Common questions

"My HTX-202 shows ER1 (or ERR1) every time I turn it on — what does that mean, and is it fixable?"

ER1 is the manual's Internal RAM Error: the radio has detected an error in its battery-backed memory, most commonly because the internal lithium backup battery is low (static discharge or a physical shock can also trip it). Clear it by turning the radio off, holding FUNCTION + CLR (the D key), and turning it back on — that resets the radio and clears the memories. If ER1 comes back on every power-up, the backup cell itself is dead. It is a 3 V lithium cell (owners fit a CR2032, often in a holder so the next change is easy), but it was soldered / spot-welded in at the factory and Radio Shack called it not user-serviceable — so price a chronic-ER1 unit as a small repair project, not as a working radio with a quirk.

"The battery pack is dead — what can I actually run an HTX-202 on today?"

Three honest routes, all in the manual: a replacement rechargeable pack (modern replacements are NiMH, roughly 8–9 V), the supplied alkaline holder with six AA cells (9 V, about 4 watts out), or external DC at 7.2–13.8 V (up to about 6 watts at 13.8 V). Owners reviving these radios report good results with the AA holder, including with modern 1.5 V lithium AA cells. What you cannot assume is that the pack in the listing works — after 30-plus years, "includes battery" means nothing until the seller says it takes and holds a charge.

"Can I program an HTX-202 with a computer or CHIRP?"

No. These are keypad-only radios — every memory, offset, and tone setting goes in from the front panel. That is a limitation and, for a lot of owners, the charm: there is no cable to lose and no software to go obsolete. It does mean a seller's claim of "fully programmed" is worth checking channel by channel, and that your time to program 16 memories by hand belongs in how you value a ready-to-go unit versus a reset one.

Get HTX-202 deal alerts

Join the daily digest — one email a day when new below-market bargains are posted, including the Radio Shack HTX-202. No spam, unsubscribe anytime.

Other Radio Shack equipment