Values are estimates from recent comparable sales — condition, accessories, and included extras vary. Always compare before buying.
Selling your Yaesu FT-897D? Run its Rig Check → Answer the questions a sharp buyer will ask and get a condition report for your listing — a fully answered report lets a truly nice radio demand a good price.
Median sold price per month from 8 sold listings (Aug '26–Oct '26). Roughly flat over the period.
Based on classifieds listings marked SOLD — asking prices sellers marked as sold, not confirmed sale prices. Refreshed daily from our deal-scan comp checks.
| Date sold | Item | Price | Status |
|---|---|---|---|
| Oct 2026 | Yaesu FT-897D | $899 | SOLD |
| Oct 2026 | Yaesu FT-897D | $1,100 | SOLD |
| Sep 2026 | Yaesu FT-897D | $810 | SOLD |
| Sep 2026 | Yaesu FT-897D | $725 | SOLD |
| Sep 2026 | Yaesu FT-897D | $975 | SOLD |
| Aug 2026 | Yaesu FT-897D | $749 | SOLD |
| Aug 2026 | Yaesu FT-897D | $1,000 | SOLD |
| Aug 2026 | Yaesu FT-897D | $995 | SOLD |
No live below-market deals on this model right now — the good ones sell fast. Get the daily digest and you’ll see the next one before anyone else.
The Yaesu FT-897D is the all-mode, all-band portable in its final and best-equipped form: 160 through 6 meters (US version including 60 meters), plus 2 meters and 70cm, SSB/CW/AM/FM and digital modes, 100 watts on HF/6m, 50 watts on 2m, and 20 watts on 70cm from a 13.8V supply. It is a separate model from the plain FT-897, and it stays separate on this site for the same reason the FT-857 and FT-857D do: the D made formerly extra-cost equipment standard — the TCXO high-stability oscillator and built-in DSP — and added the US 60-meter channels (QST's November 2004 review of the D models states all three points). What defines the 897 family is the power flexibility: run it at full power from an external supply, from the optional internal FP-30 AC supply, or from up to two optional internal FNB-78 Ni-MH battery packs, on which it automatically drops to 20 watts (10 watts on 430 MHz). Our recorded sales put the median at $937 on 8 in-window sales, so a genuine bargain sits under about $703 — but read on before comparing any single listing to that figure, because the spread on this model is wide for a reason. Why the spread is so wide: nearly every recent ledger sale bundles the expensive options — FP-30 supplies, FC-30 tuners, LDG AT-897 tuners recur in title after title ($810–$1,100), while the one unbundled QTH sale sits at $550. A bare 897D and an 897D with its internal supply and side tuner are different purchases wearing the same name. Compare the bundle, not the headline. Buying used, settle the identity and the options first: confirm it is actually a D (60-meter channels present; TCXO/DSP standard), then inventory what's inside — FNB-78 packs (how many, and do they still hold a charge? Owners have called the packs expensive and short-lived, and a dead pack is dead weight priced as a feature), the FP-30, and any Collins mechanical filters (YF-122S SSB / YF-122C CW — an eHam reviewer recommends the 500 Hz filter specifically for CW and digital work). Then transmit on every band at full power, and remember the port trap owners flag: the FC-40 remote tuner and CAT control share the same rear port, so a seller's "CAT doesn't work" may just be a tuner conflict — or vice versa. One more identity check: the original FT-897's figures differ (25W on battery, 4,800 mAh pack) against the D's (20W, 4,500 mAh) — if a listing's numbers match the original's spec sheet, you may be looking at a plain 897 wearing a D badge.
That is QST's own framing in its November 2004 review ("the question for me, and many other users, is 'why do I need a D?'"). The answer the review gives: the D models include the temperature-controlled crystal oscillator (TCXO) stage that was optional before, operate on the five US 60-meter channels, and (for the 857D, DSP; the 897D likewise carries DSP as standard fit per its technical supplement's TCXO-9/DSP parts listing and owner reports) — at the same prices as the originals. Performance is otherwise comparable. Practically: a D should show 60m channels and standard TCXO stability (±0.5 ppm class); a plain 897 reaches the same place only with paid options fitted.
20 watts automatically (10 watts on 430 MHz), per the operating manual — the radio switches itself down when running on the optional FNB-78 Ni-MH pack (13.2V, 4,500 mAh in the D manual). Full 100/50/20W output requires the 13.8V external supply or the FP-30 AC supply. Note the original FT-897's manual prints different battery figures (25W; 4,800 mAh pack) — one more way to tell the two models apart.
No — an eHam reviewer flags it directly: the FC-40 auto-tuner and CAT use the same rear port on the FT-897D, so it's one or the other at a time. Plan your station wiring accordingly, and don't read a "dead CAT port" on a used unit until you've checked whether a tuner was sharing it.
Join the daily digest — one email a day when new below-market bargains are posted, including the Yaesu FT-897D. No spam, unsubscribe anytime.